- Type: Decorative Stainless Steel Sheet
- Material:Grade 201 Stainless Steel
- Edge: Mill Edge/Slit Edeg
- Standard: ASTM/AISI/GB/JIS/DIN/EN
- Feature: Sustainable
- Usage: Ceiling/Door/Wall/Hotel/Club/Office
- Packing: Safety packing with wooden Case
- Original Material: POSCO/JISCO/TISCO/LISCO/BAOSTEEL etc.
Types of stainless steel embossed plates
(1) Classification according to production process
1. Mold stamping: plate processing, local force
Mold stamping is to frequently stamp one pattern after another on the plate, so the depth and three-dimensional sense of the mold stamping pattern are stronger than the roll embossing.
2. Roll embossing: roll processing, average force
Roll embossing is the whole roll through the unwinding machine, embossing roller, and winding machine. Therefore, the flatness of the stamped plate is better than that of the stamped plate.
(2) Classification by appearance
1. Single-sided embossing
Process: Through roller pressing mechanical equipment, under the working condition of a single cylindrical pattern mold, the stainless steel coil is extruded to make the front side present a concave and convex pattern and the back side is flat.
Features: It has the characteristics of scratch resistance, impact resistance, dirt resistance, easy cleaning, and anti-sticking.
Production thickness: 0.8-2.0mm, width below 1.22m, and length can be customized (within 6m).
Chemical Composition of stainless steel embossed sheet | Grade | STS 304 | STS 316 | STS 430 | STS 201 |
| Elong(10%) | Above 40 | 30MIN | Above 22 | 50-60 |
| Hardness | ≤200HV | ≤200HV | Below 200 | HRB100,HV230 |
| Cr(%) | 18-20 | 16-18 | 16-18 | 16-18 |
| Ni(%) | 8-10 | 10-14 | ≤0.60% | 0.5-1.5 |
| C(%) | ≤0.08 | ≤0.07 | ≤0.12% | ≤0.15 |
FQA
1. WHERE IS MEIBAOTAI LOCATED?
Our company located in FOSHAN GUANGDONG CHINA.
Factory Address: A2-3 Factory Building, Sanshan Huadao North Road, Nanhai Distrct, Foshan City, Guangdong Provenice, China
Export Office Address: Room 1919, Floor 19, Veinna building, Chencun, Shunde, Foshan, Guangdong, China
2. WHAT COLORS CAN BE DONE FOR PVD PLATING AND WATER PLATING?
PVD plating: gold, coffee gold, champagne gold, rose gold, rose red, bronze, sapphire blue, violet, black titanium, jade green, grass green, etc.
3. Consistent Quality.
All our facilities are tested several times before production, and each product will be prototyped before bulk production to ensure stable quality.
